Carl Johnk - Resume

EDUCATION
Stanford University, Stanford, California
BS in Chemical Engineering, 1978
EMPLOYMENT HISTORY
10/99 to
Present. Johnk Engineering, Inc. Cardiff by the Sea, CA
Independent Consulting Engineer
providing engineering services to the fluidized bed industry.
1/98 to 10/99. Solar Turbines Inc., San Diego, CA
Program
Manager. Responsible for technical
development of marine propulsion package utilizing new 19,000HP gas turbine.
Controls Design Engineer. Responsible for design of PLC control
systems for gas turbine-compressor packages.
8/87 to 1/98. Foster Wheeler Energy Int’l (formerly
Ahlstrom Pyropower), San Diego, CA.
8/92 to 1/99. Manager Process Development, Global
Technology Department. Responsible for
developing and implementing process improvements to Foster Wheeler’s CFB
combustion technology, coordinating with
the company’s international
engineering and technology centers.
6/91 to 8/92. Supervisor, Process Engineering. In addition to duties of Process Engineer,
responsible for supervision and administration of small group of process
engineers.
5/88 to 6/91. Process Engineer. Responsible for providing technical guidance and assistance to
various groups of the company. In particular,
plant operations troubleshooting and problem solving for
Field Engineering Services,
design guidelines and technical solutions to Performance Engineering, and
technical customer presentations for Sales and Marketing.
8/87 to 5/88. Project Engineer. Responsibilities included writing and reviewing equipment
specifications and commissioning of a 50 MWe CFB boiler in Stockton,
CA.
3/80 to 8/87, Process Engineer,
Lurgi Corporation, River Edge, NJ.
1/86 to 8/87. Head Start-Up Engineer. Responsible for check-out, commissioning,
start-up, redesign and operation of 65 MWe CFB boiler for Scott
Paper in Chester, PA. Also co-prepared
and presented Lurgi’s first CFB Operator Training Course (2 week course).
6/85 to 12/85. Start-Up Engineer. Responsible for shift operation during the start-up of a 30 MWe
CFB boiler for Stadtwerke Flensburg in
Flensburg, Germany.
9/81 to 6/85. Process/Start-Up Advisor. Responsible for the the start-up and operation
of a demonstration plant built for Getty Oil in McKittrick, CA, to produce oil
by the retorting of diatomite. Main
responsibilities were shift supervision during start-up, analysis of test data,
redesign of unit and mechanical equipment and optimization of unit
operation.
3/80 to 9/81. Supervised shift operation of retorting
pilot plant at Lurgi R&D Facility in Frankfurt, Germany, during test runs
for various clients from synfuels industry.
Also involved in analysis and reporting of data collected during the
test runs.
12/77 to 3/80. Process Engineer. SRI International, Menlo Park, CA.
Responsible for design,
operation and analysis of various bench scale test units used in the generation
and detection of atmospheric dusts and aerosols.
PATENTS
U.S. Patent
No. 6,019,068. Johnk, Tsuo and Lee.
“Method And Apparatus For Injection of NOx Reducing Agent”
OTHER EXPERIENCE
Session Chairman of “Fluidized Bed Technologies” session at Power Gen ‘94.
Member of Power Gen Conference
program committee, 1994 and 1995.
Member of
American Institute of Chemical Engineers.
PAPERS
“Experience Firing Petroleum
Coke - An Update” C. Johnk, I.
Abdulally. Presented 12/96 at Power
Gen ‘96.
“Early Experience With Nova
Scotia Power’s Point Aconi Station, 165 MWe Ahlstrom Pyroflow CFB.” C. Johnk, M. Friedman, N. Andrews. Presented 5/95 at 13th International
Conference on Fluidized Bed Combustion.
Voted best paper in topic area.
“Ahlstrom Pyropower Experience
with Petroleum Coke Firing.” C.
Johnk. Presented 4/93 at American
Power Conference and 5/93 at Power Gen Europe.
“Ultra Low NOx Capabilities in
Ahlstrom Pyroflow Boilers.” C. Johnk, PK Chelian, Douglas Nunez. Presented
10/92 at 1992 Joint Power Generation Conference.
“Experience With Low Emissions
Coal Firing in Southern California.” C.
Johnk, PK Chelian. Presented 6/92 at Eco-World
‘92.
“Effect of Operating Variables
on the Performance of Ahlstrom Pyroflow CFB Boilers.” C. Johnk, PK Chelian, S. Darling. Presented 9/91 at the Ahlstrom International Customer’s
Conference.
“Ahlstrom Pyroflow Circulating
Fluidized Bed Boiler Tube Erosion Experience.”
C. Johnk, D. Wietzke. Presented
2/91 at EPRI Workshop on Materials
Issues in Circulating Fluidized-bed Combustors.
“State-of-the-Art Start up of a
Southern California CFB Boiler.” C.
Johnk, R. Bohlim, M. Hughes, D.
Beacon. Presented 10/90 at the 1990
Joint Power Generation Conference.